Manometer displays gauge and differential pressure/vacuum in eleven different units. Response time is 0.5 second. Simple hose fittings on the unit permit using hose/tubing with inside diameters from 1/16 to 3/16 inches. Large 5/8-inch-high digits are visible from six feet.
At the touch of a button unit may be zeroed or any pressure may set to zero. Differential feature permits reading the difference of the pressure or vacuum between two different sources. Memory feature recalls highest and lowest reading over any time period. A count up timer displays up to 99 hours, 59 minutes, 59 seconds. A DATA HOLD key freezes the display to capture readings. Brilliant backlighting permits reading even in dark areas. RS-232 serial computer output permits the units to be connected to a computer for monitoring and storing results.
Accuracy is ±0.3% of full scale between 0 to 50°C. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied with Traceable® Certificate, hose/tubing, 9-volt battery, RS-232 serial computer output, and ABS plastic carrying case. Size is 2-3/4 x 7-1/8 x 1-1/8 inches and weight is 5 ounces. Replacement battery Cat. No. 1112.
Control Company Cat. No. 3460 Traceable® Manometer/Pressure/Vacuum Gauge
ACCESSORY
Cat. No. 8045 Data Acquisition System - captures, displays, and stores readings on any IBM-compatible PC. Information can be imported into databases. CD and 79-inch serial cable with D9F plug.