Traceable,NIST,ISO 17025,A2LA,aerosol,anemometers,barometers,battery tester,burn stations,calculators,calipers,carts,clamps,clocks,conductivity,controllers,counters,data logger,desiccants,electrode arm,glassware tools,humidity,lasers,lights,light meters,liquid alarm,magnifiers,moisture,multimeters,oxygen meters,pens,graphs,pressure,vacuum,pumps,slide holder,software,sound meters,stopwatches,tachometers,tags,thermometers,timers,tools,wash bottles,wipes,weather station,pumps,peristaltic  
Home | About Us | Contact | Technical | Dealers | Instructions | MSDS | Order Cat.
Recalibration | Service | Conflict Minerals | Employment

Products
Anemometers
Barometers
Battery Tester
Calculators
Calipers
Carts
Clamps
Clocks
Conductivity
Controllers
Counters
Data Logger
Desiccants
Desiccators
Duster
Electrode Arm
Glassware Tool
Humidity
Lasers
Lights
Light Meter
Liquid Alarm
Manometers
Magnifiers
Moisture
Multimeters
Oxygen Meter
Pens/Graphs
pH Buffers
Pressure/Vac
Pumps
Slide Holder
Software
Sound Meter
Stopwatches
Tachometers
Tags
Thermometers
Timers
Tools
Wash Bottles
Wipes
Weather Station
Free Samples
Clamps
Desiccant
Humidity Card
Slide Holder

  4049-4374
  Traceable® Jumbo-Display Dial Thermometer
  • Switchable range between °F and °C
  • Jumbo display
  • Probe is resistant to most laboratory chemicals
 
Starting at $ 32.05
Specifications: Range is –58 to 302°F/–50 to 150°C · Resolution is 0.1° from –20 to 200°; 1° outside this range · Accuracy is ±0.3°C or ±1°C · Stem length is 5-1/4 inches · Stem diameter is 0.15 inch · Top diameter is 2-1/8 inches · Overall length is 6-1/2 inches · Weight is less than 1 ounce 

Traceable® Jumbo-Display Dial Thermometer Complete Description

Thermometer reads both °F and °C
Dedicate this thermometer to a specific test. Provides continuous monitoring for over a year. To provide for even longer battery life, the unit has an on/off switch. Thermometer is switchable between °F/°C. Wide range of –58 to 302°F/–50 to 150°C covers 90 percent of lab temperature measurements. To achieve this temperature range with equivalent precision would require over 150 mercury thermometers. Enjoy digital resolution of 0.1° from –20 to 200° (1° outside this range). Accuracy is ±1°C between –20 and 100°C. Ultra™ model accuracy is ±0.3°C at tested points. Readings are updated every second.

Resists corrosion
Smooth, stainless-steel probe is perfect for gunky and viscous solutions. Probe is resistant to most laboratory chemicals. Its piercing tip makes it perfect for measuring temperatures of semisolids. Plastic and stainless-steel construction (no glass or mercury) makes it safer than mercury thermometers.

Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Extra-large, easy-to-read display is 3/8-inch-high. Bright LCD is easier to read than eye straining guesses at pointers or mercury positions. Stem length is 5-1/4 inches, stem diameter is 0.15 inch, and top diameter is 2-1/8 inches. Overall length is 6-1/2 inches. Weight is 1 ounce. Supplied with silver-oxide battery and Traceable® Certificate. Replacement battery Cat. No. 1039.

Control Company Cat. No. 4049 Traceable® Jumbo-Display Dial Thermometer

Accuracy ±1.0°C

Control Company Cat. No. 4374 Traceable® Ultra™ Jumbo-Display Dial Thermometer

Accuracy ±0.3°C

Control Company Cat. No. 4355 Traceable® Surface Dial Thermometer

Accuracy ±1.0°C

Identical to Control Company Cat. No. 4049 but with 1/2-inch-diameter metal disk at end of probe for surface measurements.

Page updated on