|
Traceable® Conductivity Meter Complete Description
Traceable® Conductivity for pure water
To assure accuracy, a certificate is provided to indicate instrument traceability to standards provided by NIST (National Institute of Standards and Technology). Use to verify the purity of water from stills, deionizing, and reverse osmosis equipment. Range in microsiemens (micromhos) is 0.1 to 200.0, in megohms is 2.00 to 20.00. Accuracy is ±0.4% full scale. Range is from ultra pure to tap water. Adjustment permits calibration to solution standards.
Easy to use
Ideal for routine analysis, quality control, and research. Elimination of operator technique permits everyone in the lab to report identical readings. Supplied probe contains platinum electrodes and a solid-state thermistor (for automatic temperature compensation). Readings are automatically referenced to the international standard of 25°C. An external electronic calibration plug for 10 microsiemens (micromhos) is supplied. Supplied glass probe is 5-1/2 x 1/2 inches diameter with a cable of 59 inches. Size is 3-1/4 x 4-1/2 x 1-1/2 inches. Weight is 8-7/8 ounces. Replacement battery Cat. No. 1112.
Control Company Cat. No. 4070 Traceable® Conductivity Meter
| Performance Chart |
Range in Micromhos
(microsiemens) |
0.1 to 200.0 |
| Range in Megohms |
2.00 to 20.00 |
| Accuracy |
± 0.4% full scale |
| Cat. No. |
Accessories |
| 4079 |
Replacement Probe- Glass, K=1 |
| 4074 |
Accessory Probe- Unbreakable Epoxy, K=1 |
| 4077 |
Accessory Glass Probe- K=0.1, Increases sensitivity of low range 10 times |
| 4078 |
Accessory Probe Unbreakable Epoxy- K=10, Increases sensitivity of high range 10 times |
| 4057 |
Accessory Glass Flow-Through Cell, with volume of 4 ml, K=1 |
| 4056 |
4056 Accessory Micro-Sampler and Micro Flow-Through Cell, with volume of 2 ml, K=0.2 |
| 4071 |
Accessory Battery Eliminator, Adaptor 115 VAC/60 Hz |
|
