|
pH/Conductivity Universal Flow-Thru Adaptor Complete Description
Flow-through adaptor is universally designed to accept all 1/2-inch (12 mm) diameter conductivity probes and pH electrodes. Allows constant monitoring of flowing fluids with a standard dip probe. Two O-rings provide a secure, leakproof seal.
Connectors accept tubing with a 1/16-, 3/32-, 1/32- and 1/8-inch inside diameter. Cell volume depends on the positioning of the probe (approximately 2 to 4 ml). Flow rate may be from 0.001 to 50 milliliters per minute. Constructed of teflon (universally chemically inert), it may be in constant use at temperatures from –100 to 500°F. Size is 1-inch diameter x 2-1/4 inches.
Control Company Cat. No. 4167 pH/Conductivity Universal Flow-Thru Adaptor
|
