|
Traceable® Infrared Thermometer w/ Type-K Probe Complete Description
Traceable® Infrared Thermometer, operation is simple—turn on, point at sample, and take a reading in less than a second. Unit reads both Fahrenheit and Celsius of any surface—solids, semisolids, and liquids. Non-invasive, no-touch, measurements are ideal for food, life sciences, pharmaceuticals, petroleum products, clean rooms, electronics, and field use. Temperature range is –76 to 932°F and –60 to 500°C. Resolution is 0.1°. Accuracy is ±1°C + 2%.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). The dual display shows current temperature plus one of the following eight modes: emissivity value, maximum memory, minimum memory, differential, average (time weighted), high temperature alarm, low temperature alarm, and probe temperature. Minimum and maximum feature permits viewing highest and lowest readings at any time. Thermometer displays the average of all readings made and the difference between two readings. Audible, user settable, high and low alarms signal out of range conditions. Memory permits recalling individually captured temperatures. HOLD, freezes the display at the current reading. Backlighting permits viewing in low light conditions. Adjustable emissivity from 0.1 to 1.00 in increments of 0.01. Field of view is 11:1 (for example, at a distance of 22 inches the reading spot size is 2 inches). Range using Type-K thermocouple jack is –83 to 2552°F and –64 to 1400°C. Type-K beaded sensor supplied. Display indicates low battery. Batteries are supplied with unit. Size is 7 x 2-3/4 x 1-1/2 inches. Weight is 6 ounces. Replacement battery (2 each) Cat. No. 1105.
View Infrared Thermometer Comparison Chart
Control Company Cat. No. 4482 Traceable® Infrared Thermometer with Type K Probe
| Cat. No. |
Accessories |
| 4008 |
Surface Probe - Stainless-steel with handle, triple purpose. Temperature range is –73 to 760°C. Dimensions: 5-inch probe length; 0.5-inch tip diameter; 8-1/2-inch overall length. Supplied with 36-inch cable. |
| 4014 |
Stainless-steel Probe - Stainless-steel with handle, triple purpose (liquids, air/gas, and semi-solids), Type K (NiCr/NiAl) probe. Temperature range is –50 to 700°C. Dimensions: 0.13-inch diameter; 6-1/4-inch stem length; 9-3/4-inch overall length. Supplied with 40-inch cable. |
| 4028 |
Beaded Probe - Fast-Response, Type K thermocouple, beaded probe. Teflon cable can withstand temperatures of –40 to 250°C continuous or 300°C short-term use. Dimensions: 0.06-inch diameter probe with cable length of 4 feet for use with all Type K thermometers in liquids, air/gas, and semi solids. |
| 8039 |
Low-Temperature Probe - Stainless-steel with handle; triple purpose (liquids, air/gas, and semi-solids), Type K (NiCar/NiAl) probe. Temperature range is –240 to 220°C. Dimensions: diameter 0.17 inch; stem length 12 inches; overall length 17 inches. Supplied with 8-foot expandable cable. |
| 8613 |
High-Temperature Probe - Ten-foot-long 0.19-inch diameter braided metal wire cable with smooth tip measures –73 to 982°C continuous or 1093°C short-term use. For use with all Type K thermometers in liquids, air/gas, and semi-solids.
|
|
