Traceable,NIST,ISO 17025,A2LA,aerosol,anemometers,barometers,battery tester,burn stations,calculators,calipers,carts,clamps,clocks,conductivity,controllers,counters,data logger,desiccants,electrode arm,glassware tools,humidity,lasers,lights,light meters,liquid alarm,magnifiers,moisture,multimeters,oxygen meters,pens,graphs,pressure,vacuum,pumps,slide holder,software,sound meters,stopwatches,tachometers,tags,thermometers,timers,tools,wash bottles,wipes,weather station,pumps,peristaltic  
Home | About Us | Contact | Technical | Dealers | Instructions | MSDS | Order Cat.
Recalibration | Service | Salary Data | Employment

Products
Anemometers
Barometers
Battery Tester
Burn Stations
Calculators
Calipers
Carts
Clamps
Clocks
Conductivity
Controllers
Counters
Data Logger
Desiccants
Desiccators
Duster
Electrode Arm
Glassware Tool
Humidity
Lasers
Lights
Light Meter
Liquid Alarm
Manometers
Magnifiers
Moisture
Multimeters
Oxygen Meter
Pens/Graphs
pH Buffers
Pressure/Vac
Pumps
Slide Holder
Software
Sound Meter
Stopwatches
Tachometers
Tags
Thermometers
Timers
Tools
Wash Bottles
Wipes
Weather Station
Free Samples
Clamps
Desiccant
Humidity Card
Slide Holder

  4485
  Traceable® Infrared Dual Lasers Thermometer w/Type-K Probe
  • 2 Laser sightings for accuracy
  • -76 to 1022°F and -60 to 550°C Range
  • 12 to 1 Field of View
 
Starting at $ 126.38
Specifications: Temperature range is –76 to 1022°F and –60 to 550°C • Resolution is 0.1° • Accuracy is ±2% of the reading or 2°C, whichever is greater • Size is 7 x 3-3/4 x 2 inches • Weight is 9 ounces 

Traceable® Infrared Dual Lasers Thermometer w/Type-K Probe Complete Description

Traceable® Infrared Dual Laser Thermometer, operation is simple—turn on, point at sample, and take a reading in less than a second. Dual lasers indicate the outer diameter of the surface area being measured and the white LED light illuminates the surface. Field of view is 12:1 (for example, at a distance of 24 inches the reading spot size is 2 inches). Unit reads both Fahrenheit and Celsius of any surface—solids, semisolids, and liquids. Non-invasive, no-touch, measurements are ideal for food, life sciences, pharmaceuticals, petroleum products, clean rooms, electronics, and field use. Temperature range is –76 to 1022°F and –60 to 550°C. Resolution is 0.1°. Accuracy is ±2% of the reading or 2°C, whichever is greater.

The dual display shows current temperature plus one of the following eight modes: emissivity value, maximum memory, minimum memory, differential, average (time weighted), high temperature alarm, low temperature alarm, and probe temperature. Minimum and maximum feature permits viewing highest and lowest readings at any time. Thermometer displays the average of all readings made while taking measurements and the difference between two readings. Audible, user settable, high and low alarms signal out of range conditions. Display backlight permits viewing in low light conditions. For measurement of different types of material, adjustable emissivity may be set from 0.1 to 1.00 in increments of 0.01. Range using Type-K thermocouple jack is –83 to 2552°F and –64 to 1400°C.

Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Type-K beaded sensor and two AAA Alkaline batteries are supplied with unit. Size is 7 x 3-3/4 x 2 inches. Weight is 9 ounces.

View Infrared Thermometer Comparison Chart

Control Company Cat. No. 4485 Traceable® Infrared Dual Lasers Thermometer w/Type-K Probe

Page updated on