Traceable,NIST,ISO 17025,A2LA,aerosol,anemometers,barometers,battery tester,burn stations,calculators,calipers,carts,clamps,clocks,conductivity,controllers,counters,data logger,desiccants,electrode arm,glassware tools,humidity,lasers,lights,light meters,liquid alarm,magnifiers,moisture,multimeters,oxygen meters,pens,graphs,pressure,vacuum,pumps,slide holder,software,sound meters,stopwatches,tachometers,tags,thermometers,timers,tools,wash bottles,wipes,weather station,pumps,peristaltic  
Home | About Us | Contact | Technical | Dealers | Instructions | MSDS | Order Cat.
Recalibration | Service | Conflict Minerals | Employment

Products
Anemometers
Barometers
Battery Tester
Calculators
Calipers
Carts
Clamps
Clocks
Conductivity
Controllers
Counters
Data Logger
Desiccants
Desiccators
Duster
Electrode Arm
Glassware Tool
Humidity
Lasers
Lights
Light Meter
Liquid Alarm
Manometers
Magnifiers
Moisture
Multimeters
Oxygen Meter
Pens/Graphs
pH Buffers
Pressure/Vac
Pumps
Slide Holder
Software
Sound Meter
Stopwatches
Tachometers
Tags
Thermometers
Timers
Tools
Wash Bottles
Wipes
Weather Station
Free Samples
Clamps
Desiccant
Humidity Card
Slide Holder

  5057-5058
  Traceable® Walkaway™ Count-up Controllers
  • Counts up and turns equipment off
  • Repeat Turn-on/Turn-off
  • Program setting in less than five seconds
 
Starting at $116.01
Specifications: 1/2-inch-high LCD display • Controls equipment to 120 VAC, 15 amps, 1800 watts • Accuracy of 0.01% • Size is 6 x 2-3/4 x 3-1/4 inches • Weight is 12 ounces 

Traceable® Walkaway™ Count-up Controllers Complete Description

Model 1: Walkaway™ Turn-off Controller counts up and turns any piece of equipment off at the end of a set time period. Programmable in three interval settings: .01 second to 99.99 seconds; 1 minute to 99 minutes; or 1 hour to 99 hours.

Model 2: Walkaway™ Repeat Turn-on/Turn-off Controller counts up and turns any piece of equipment on for a programmed time and off for a different programmed time. Repeat feature automatically continues cycling on and off programmed times until manually stopped. Programmable for separate on and off timing periods in three interval settings: 1 second to 99 seconds; 1 minute to 99 minutes; or 1 hour to 99 hours.

Switch equipment on/off instantly with manual override
Controllers perform reproducible stirring, heating, or pumping times. Use for timed shutdown or repeated on/off timing. A manual pause switch overrides the program without disturbing it, and permits equipment to be switched off instantly. Supplied internal nicad battery maintains programs in the event of a power outage. Intuitive operation permits setting a program in less than five seconds. Automatic operation allows walking away from the equipment.

Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).

LED indicates status of attached equipment
Unit’s timing accuracy is 0.01%. LCD backlit-display digit height is 1/2-inch. Three-pronged grounded receptacle relay turns on/off apparatus to 120 VAC, 15 amps, 1800 watts, 1/3 horsepower. Red LED indicates the on/off status of attached equipment. High-impact ABS case is 6 x 2-3/4 x 3-1/4 inches. Weight is 12 ounces.

Control Company Cat. No. 5057 Traceable® Walkaway™ Turn-off Controller (pictured above)(Patented)

Control Company Cat. No. 5058 Traceable® Walkaway™ Repeat Turn-on/Turn-off Controller (pictured below)(Patented)

Page updated on